RVGeek

RV & Truck Electronics best prices

This aluminum made telescope antenna mast is very light (1.5lbs) and ideal for marine, RV or any mobile antenna mounting. The mast cane be easily attached to or dettached from the mounting bracket. Fully extended length is 59 inch and it’s only 24″ when collapsed.

Product Features

  • This aluminum made telescope antenna mast is very light (1.5lbs) and ideal for marine, RV or any mobile telescoping antenna mounting
  • The mast cane be easily attached to or dettached from the antenna mounting bracket
  • This telescopic antenna pole fully extended length is (59 inch) and it’s (only 24) inch when collapsed
  • Mounting hardware for wood & concrete included
  • This outdoor tv antenna mount mast diameter is 1.1 Inch

Click Here to Get More Detailed Information About This Product…

Fits Most 10” to 26” TV Mounting Dream RV TV mount MD2209 fits most TV size from 10” to 26” and RV mount supports TV up to 22 lbs weight having VESA pattern 75x75mm and 100x100mm Not sure we are willing to help you check when sending mail to us by providing TV model name Easy One-step Locking Mechanism This RV TV wall bracket has been upgraded the length of the locking system just pull down the strap and push the TV back in place after hearing a sound of “”click”” the TV is locked securely in the wall Such steps would be read in the instruction And for any locking concern just contact us by mail! Multiple Viewing Angle RV mount has a tilting angle from +5° to -15° and swiveling up to -/+90° on each side as well as up to -/+3° for level management Also to help you better adjust the angle it is able to extend 346mm/ 13 6” and retracts 68mm/ 2 6” from the wall Installation Notes Please check the thickness of the wooden board we suggest that it should be 0 5″(12 7mm) thick or above because the lag bolts we provided are M6x25mm which has been calculated based on the wooden board Please be kindly note that the TV plate is off center about 0 63″”/16mm to the wall plate Related description can be seen in the images Quick Installation with Gifts RV TV wall mount comes with enough hardware for the installation following the instruction step by step For better service we provide three cable ties and a bubble level for management And just a friendly reminder that we do not allow to use any electronic tools to finish the installation except for drilling pilot holes on the consideration of safety

Product Features

  • 【UNIQUE LOCKABLE DESIGN】RV TV Mount for Motor Home / Camper / Truck / Marine Boat — TV mount for RV fits TV size for 10-26 inch and supports TV up to 22 lbs. weight with VESA/mounting holes spacing of 75x75mm, 100 x 100mm. Not perfect? You can check Mounting Dream MD2210 RV mounts for the best options.
  • 【EASY ONE STEP LOCK MECHANISM】RV wall mount with unique locking mechanism with 10mm tongue secures swivel arms and TV plate at one time when the vehicle is in motion to prevent any bumps. One-step locking system helps you better release and lock the TV in place securely with the pulling strap. Spring latch of UPGRADE VERSION RV TV mount can stop creaking on your trip.
  • 【UPGRADE VIEWING EXPERIENCE】RV TV mount providing more enjoyable viewing angles, has a tilting angle from +5°to -15°, and swivels up to -/+90°on each side. To help better level the TV, provides up to -/+3°for level management.
  • 【EASY INSTALLATION】RV TV wall mount with decent instruction and all included hardware in pre-labeled bags. The wooden board in the vehicle should be thicker than 1/2 inch. Pull out to 13. 6 inch/346mm and retract back to 2. 6 inch/68mm, making your TV flexible to move.
  • 【CONSIDERABLE SERVICE】 We are glad to answer your pre-purchase and installation question about the lockable RV TV mount.

Click Here For More Information

The Mount-It! MI-431 Camper RV Articulating TV Wall Mount is specifically designed to keep your TV safely stowed away while your motorhome, vehicle or boat is moving. When you’re reached your destination and are ready to kick back for a movie, simply pull down on the quick release loop, and extend the cantilever arm. This mount can tilt, swivel, extend, and retract to be positioned in almost any viewing angle.

This heavy-duty steel frame supports up to 77 lbs and the VESA extender plates accommodate larger TVs from 23″ to 43″ screen sizes. The detachable VESA head bracket makes it convenient to remove the entire TV for long term storage.

SPECIFICATIONS:

TV SIZE RANGE: 23″ to 43″ LED LCD PLASMA TVs
VESA COMPATIBILITY: 75×75, 100×100, 200×100, 200×200 (mm)
EXTENSION: 2.3″ to 15.7″
TILT: +10/- degrees
SWIVEL: +/- 90 degrees
WALL BRACKET DIMENSIONS: 11.8″ H x 7.5″ W

Product Features

  • QUICK CONNECT TV MOUNT – Looking for must have camper accessories? This RV wall mount works with your VESA-compatible television from 23″ to 42″ TVs.
  • CANTILEVER LOCKABLE ARM – A secure wall bracket with an articulating arm that locks into a folded position and releases with an anti-vibration spring lock.
  • DETACHABLE VESA BRACKET – The VESA plate is removable to conveniently remove a TV from the wall bracket for extended storage, or to quickly reinstall it.
  • FULL MOTION ADJUSTABILITY – Tilt +10/-15 degrees, Swivel +/- 90 degrees, Extension 2.3″ – 15.7″, VESA compatible 75x75mm up to 200x200mm.
  • HEAVY DUTY CONSTRUCTION – The all-steel frame has stopping pins to reduce vibration, supports up to 77 lbs, and the kit includes a universal hardware kit.

Click Here For More Information

27 MHz (26-28 MHz) CB mobile antenna with magnet base and 13ft RG-58/U cable and PL-259 connector. Steel whip with protective rubber cup. Locking screw for adjusting and tightening the antenna whip.Also equipped with BNC to SO-239 adapter,connector for handheld cb radio to compatible with antenna.

Specifications:
Frequency Range: 26-28MHz (Center Frequency: 27MHz)
Base diameter:70mm
Gain: 3dB
MAX RF Power: 30W
Cable: 13ft RG-58/U
V.S.W.R: 1.2:1
Impedance: 50 Ohm
Length: 0.35m(13.7in)

Package:
1 x CB Antenna for cb handheld radio
1 X BNC to SO-239 adapter

Warning! Observe the maximum height on roads where will drive so that the antenna does not touch any installations or construction.

Product Features

  • 1. CB antenna 14 inch with PL-259 connector, magnet base and 13ft RG-58/U cable.
  • 2. Equipped with BNC to SO-239 adapter,connector for handheld cb radio to compatible with antenna when you in the car.
  • 3. Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception.
  • 4. 13ft RG-58/U cable let you can put the antenna to the best position with good signal.
  • 5. Warranty would be valid for 12 months against manufacturing defect.

Get More Detailed Information About This Product…

solar battery charger maintainer

Product Features

  • [Intelligent Charge & Maintain] Built-in intelligent MPPT charge controller, generates at least 10%-20% more power than traditional controller. Smart 3-stages charging algorithm is improved to better charge and maintain 12v battery in all seasons.
  • [Full Protections] Prevent battery from over charge, over voltage, discharge and short circuit, reversed polarity protection, waterproof and sparkproof, battery is fully protected.
  • [Adjustable Mount Bracket] Exclusively engineered with alloy ball to adjust the angle of solar panel, absorb as much as sunshine and generate more power. The mount bracket is easy to DIY, could be applied to mount on ground or vertical wall.
  • [Visual Monitor] The colorful LED indicator helps to visually monitor the working status, better understand battery conditions-flash in green, output normal; flash in Red, Charging normal; solid green, battery is full; solid red, errors; indicator off, no output.
  • [Free Maintenance] Durable aluminium frame and tempered glass, well built for years. Come with 3 piece SAE cable kits, plug and play, easy to use. No electricity cost, free maintenance for outdoor use. Backed by extended 12 months warranty and lifetime technical supports.

Get More Detailed Information About This Product…

Portable satellite mount for your recreational vehicle, or boat. This mount can be vertically adjusted to your desired height within 12″.

Product Features

  • For portable satellites TV Antennas like the older style Dish Playmakers, King Flex, Tailgater, Carryout, etc.
  • Only fits 1″ diameter tubing.
  • Simple installation. Mounts to your RV ladder or boat in 15 minutes or less.
  • Vertical Adjustments can be made.
  • Solid, clear anodized aluminum. Made in the USA.

Click Here to Get More Detailed Information About This Product…

Portable satellite mount for your recreational vehicle. Horizontally mount your satellite from your ladder. Does not extend above roof line.

Product Features

  • For portable satellites TV Antennas like the older style Dish Playmakers, King Flex, Tailgater, Carryout, etc.
  • Only fits 1″ diameter tubing.
  • Simple installation. Mounts to your RV ladder in 15 minutes or less.
  • Solid, clear anodized aluminum. Made in the USA.

Click Here to Get More Detailed Information About This Product…

The Rhino Bumper Mount Tote Tank Holder securely holds your Rhino Tote Tank onto standard RV bumpers and fits both 4² and 4-1/2² bumpers. It’s perfect for RVs without ladders. The holder is constructed of powder-coated steel with zinc-coated hardware for durability. Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons) and is also compatible with most portable waste holding tanks on the market. Includes straps to secure your tote tank in place.

Product Features

  • Securely holds your Rhino tote tank onto standard RV bumpers
  • Perfect for RVs without ladders
  • Fits 4″ and 4-1/2″ bumpers
  • Made out of powder-coated steel with zinc-coated hardware included; also includes straps to secure your tote tank in place
  • Holds all four Rhino Tote Tank sizes (15, 21, 28 and 36 gallons); compatible with most portable waste holding tanks on the market

Click Here For More Information

solar battery charger

Product Features

  • [Intelligent Charge & Maintain] Built-in intelligent MPPT charge controller, generates at least 10%-20% more power than traditional controller. Smart 3-stages charging algorithm is improved to better charge and maintain 12v battery in all seasons.
  • [Full Protections] Prevent battery from over charge, over voltage, discharge and short circuit, reversed polarity protection, waterproof and sparkproof, battery is fully protected.
  • [Adjustable Mount Bracket] Exclusively engineered with alloy ball to adjust the angle of solar panel, absorb as much as sunshine and generate more power. The mount bracket is easy to DIY, could be applied to mount on ground or vertical wall.
  • [Visual Monitor] The colorful LED indicator helps to visually monitor the working status, better understand battery conditions-flash in green, output normal; flash in Red, Charging normal; solid green, battery is full; solid red, errors; indicator off, no output.
  • [Free Maintenance] Durable aluminium frame and tempered glass, well built for years. Come with 3 piece SAE cable kits, plug and play, easy to use. No electricity cost, free maintenance for outdoor use. Backed by extended 12 months warranty and lifetime technical supports.

Get More Detailed Information About This Product…


Kindly remind:
1. Arlo pro batteries must be removed for use, only for Arlo pro, not for Arlo go, Arlo pro2, Arlo lights.
2. All Arlo pro security camera as picture shown are not included.

Product features: 
Especially designed for Arlo pro indoor/outdoor camera
Versatile 360°adjustable mount
High solar performance 
Good charging convenience
Micro USB connector cable 

Warm notes:
1. Weather conditions, dust and debris will affect the energy production of solar panel; The solar panel may produce diverse amount of the energy in different time of a day or in different seasons even placing in the same place.
2. Make sure the surface of the solar panel is clean before using, put it on a good location to maximize the sunlight exposure.

Package includes:
1 x Solar panel(7 x 6.02 x 0.59 inch)
1 x 12 feet /3.6 m cable with micro USB connector
1 x 360°Adjustable mount
3 x Mounting anchors
3 x Installation screws
1 x User manual

Note:
1. This is compatible spare part, mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
2. If the camera does not work, disconnect the micro USB plug from the camera, let the solar panel work in the sun for more than 8 hours, and then insert the micro USB plug into the camera.

Product Features

  • 【White Solar Panel for Arlo Pro Cams】Tip: ☀ARLO PRO BATTERIES MUST BE REMOVED FOR USE, ONLY FOR ARLO PRO, NOT FOR ARLO GO, ARLO PRO2, ARLO LIGHTS☀, new solar panel for arlo pro under the strong sunshine to get power continuously, ensure that your outdoor security camera not runs out of juice again.
  • 【360-Degree Security Mounting】the customized adjustable wall mount bracket allows you to easily fix it some places you want, position your solar panel and ensures that it is placed directly in maximum sunlight exposure
  • 【Weatherproof Design】the output 9v solar panel made of polycrystalline silicon, solar panel surface will remain clean and use for a long time, continuously supply power to arlo pro camera for home, patio of your garden, roof, wood, etc.
  • 【High-converting Photovoltaic Cell】built-in 3350mAh lithium battery, arlo pro solar panel charger supply continuous power for camera at night, in cloudy or rainy days, camera will not easily power off, providing lasting surveillance for your house. Please install the solar panel in good lighting for better performance
  • 【12 Feet Cable】we’ve equipped our panel with an extra-long micro USB connector cable (12 feet/ 3.6 m) to give you greater flexibility when it comes to enough distance positioning; Please contact us if any question, we will try our best to respond you with satisfaction timely

Get More Detailed Information About This Product…


Product Description:
1.The solar panel can be adjust into multiple oblique angles, adjust the orientation according to the seasons and weathers, maximum to turn the sunlight power into solar power.
2.The 360 degree adjustable mount should attach to the solar panel by rotating the screw tip into the hole on the back of the solar panel
3.Adjust the swivel, rotate the protrusion anticlockwise to loose, after adjustation, rotate clockwise to tighten the swivel.
4.Charging continuously, just a few hours of sunlight, keep your surveillance cam runnning all day.
5.Long cable (12 feet) offers you the freedom to place it right where you want.
6.Waterproof designed solar panel surface, durable and long-lasting.

Specification:
Solar panel material: polycrystalline silicon
Color: white
Product dimensions: 18 x 15.5 x 13 cm/ 7 x 6 x 5 inch
Boxed-product weight: 0.8 kg
Cable length: 12 feet/ 3.6 m

Product features:
Especially designed for Arlo HD Security Camera
360°Adjustable mount
Great solar performance
DC connector cable

Packing list:
1 x Solar panel for Arlo HD Security Camera
1 x DC connector cable (12 feet/ 3.6 m)
1 x 360°Adjustable mount
4 x Mounting anchors
4 x Installation screws
1 x User manual

Please note:
1.The mention of camera’s brand names and any related models above is only for purposes of demonstrating compatibility.
2.This solar panel is designed for Arlo HD Security Camera, it’s only compatible with Arlo HD Security Camera

Product Features

  • Get power continuously: connects solar panel to the Arlo HD Security Camera to get non-stop power from the sun, it automatically charges the internal battery, you can ensure that your outdoor camera never runs out of power again and do not need to replace the battery
  • 360-Degree sdjustable mount: easy installation, easy to secure the screws on the wall; The 360 degree wall mount allows you to adjust the orientation according to the seasons and weathers, ensure maximal sun light exposure
  • Operating conditions: -5 u00b0F to 120 u00b0F (-20u00b0C to 48u00b0C), the solar panel surface is made of polycrystalline silicon, weatherproof design, durable and long-lasting
  • Built-in high-converting cells: the solar panel can generate enough power for Arlo HD Security Camera, more faster charging speed and higher photoelectric conversion rate keep for your Arlo HD Security Camera stay powered day and night, more effective
  • 3.6 Meter cable: simply mount the panel outside your house and connect the weatherproof micro USB cable with your camera; 12 Feet cable provides you flexibility in charging for your Arlo HD Security Camera, no need to worry the limit of distance

Get More Detailed Information About This Product…

Pyle Model : PLRV1725

Roof Mount Flip-Down Monitor Display

Vehicle Flip-Down Display Screen – Roof Mount Monitor with 1080p Support, HDMI/USB/Micro SD/IR/FM Transmitter (17.3’’ -inch Display)

Features:

  • Universal Vehicle Mount Overhead Display
  • Car Video Entertainment System
  • Convenient Flip-Down Screen Access
  • Hi-Res LCD Wide-Screen Video
  • Full HD 1080p Support
  • HDMI Input
  • Built-in Stereo Speakers
  • Front Panel Button Controls
  • USB Flash & TF Memory Card Readers
  • Connect Additional Device via RCA (Audio/Video) Wiring Harness
  • Built-in IR Transmitter for Wireless IR Headphone Use
  • FM Transmitter
  • What’s in the Box:

  • Roof Mount Monitor Console
  • Power Wiring Harness Cable
  • Technical Specifications:

  • Display Type: LCD, 17.3’’ -inches
  • Video System: PAL / NTSC Compatible Auto Switching
  • Aspect Ratio: 16:9
  • Screen Resolution: 1680 x 800 Pixels
  • Contrast Ratio: 300:1
  • Brightness: 350 cd/m2
  • English OSD Menu
  • Digital File Compatibility: MP3, MP4, MP5, JPG, MPEG4, WMA, AVI
  • Maximum USB/SD Card Size: 32GB
  • Power Supply: DC 12-24V
  • Dimensions (L x W x H): 19.7” x 12.2” x 1.7’’ -inches (Closed)
  • The Pyle Vehicle Flip-Down Display Screen – Roof Mount Monitor with 1080p Support, HDMI/USB/Micro SD/IR/FM Transmitter (17.3’’ -inch Display) – Universal Vehicle Mount Overhead Display – Car Video Entertainment System – Convenient Flip-Down Screen Access – Hi-Res LCD Wide-Screen Video – Full HD 1080p Support – HDMI Input – Built-in Stereo Speakers – Front Panel Button Controls – USB Flash & TF Memory Card Readers – Connect Additional Device via RCA (Audio/Video) Wiring Harness – Built-in IR Transmitter for Wireless IR Headphone Use – FM Transmitter – What’s in the Box: – Roof Mount Monitor Console – Power Wiring Harness Cable – Technical Specifications: – Display Type: LCD, 17.3’’ -inches.

    Product Features

    • 17.3 INCH WIDESCREEN DISPLAY: This flip-down LCD roof mount monitor offers a 17.3 inch. Widescreen viewing angle. Perfect entertainment solution for your car that will ensure a comfortable viewing experience
    • MP3, MP4, MP5, JPG, MPEG4, WMA, AVI: The TV roof mount is compatible w/ MP3, MP4, MP5, JPG, MPEG4, WMA, & AVI w/ Built-in IR Transmitter for a wireless headphone. Connect an additional device via RCA (Audio/Video) Wiring Harness
    • 1080p FULL HD SUPPORT: This overhead vehicle monitor has 1080p support and 1680 x 800 Pixels screen resolution w/ HDMI input. Video operate system of PAL/NTSC, Contrast ratio 300. Brightness 350 cd/m2. Aspect ratio 16:9. Power supply DC 12-24V
    • UPGRADED CONTENT: The HD LCD vehicle flip down TV allows you to stream audio, as well as view image collections easily. The HD TV is compatible and works well with both Mac & PC
    • DIGITAL DRIVE SUPPORT: It supports SD Cards and USB flash drive, so you can quickly load your music and movies from your PC and play them back with ease. Just insert SD card or USB flash and you’ll have access to a wealth of entertainment options
    • NOTE: KINDLY REFER USER MANUAL BEFORE USE

    For More Information – Click Here

    The KING OA8201 Jack Antenna is simply the best RV over-the-air HDTV Antenna available. It features a wider reception range and is less directional than traditional RV antennas to provide broader reception coverage. Provides superior reception of UHF signals where over 80% of new DTV channels are broadcast, and great reception of remaining VHF channels. The Jack Antenna is easy to install and works with varying roof thicknesses and easily replaces an existing antenna. Once installed, the Jack Antenna easily avoids dead spots–effortlessly rotate the antenna 360 degrees with two fingers. The built-in digital TV reception meter simplifies setup and eliminates frustration, simply point the antenna for maximum reception before scanning for channels. The fixed height requires no cranking up or down. No need to remember to stow the antenna before driving away. The compact, aerodynamic mount offers superior wind resistance, is 70% smaller, and requires less roof space than traditional RV antennas.

    Product Features

    • Sleek over-the-air HDTV antenna with mount and built-in signal meter
    • Broader reception coverage with superior reception of UHF signals
    • Easy to install and effortless antenna rotation
    • Fixed height requires no cranking up or down
    • The compact, aerodynamic mount offers superior wind resistance and is up to 70% smaller than traditional RV antennas

    Click Here to Get More Detailed Information About This Product…