RV & Truck Electronics best prices

Power: ≤ 2W. Ultra-low power consumption, to prevent over heat.
Video Input: AV1/AV2 video input, AV1 VCD / DVD video output signal (system default), AV2 connection reversing camera (reversing automatically switch to);
Signal format: PAL / NTSC / AUTO. Compatible with all signal formats.
Contrast: 300:1. A clear contrast
Rated Voltage: DC 12V.
Resolution: 480 TV line
Image sensor: PC1030 (Distance reference marking display)
Lens angle:3.6mm(92deg)/2.8mm(120deg)
Power supply: DC 12V
S/N Radio: better than 48db
Video output: RCA connector, 1.0vp-p,75ohm
Waterproof grade: IP68 Effective
Pixels: 628x586pixles/PAL,510X496pixels/NTSC
Package include:
1 x 4.3 inch TFT LCD Mirror Monitor
1 x Camera
1 x Power cable
1 x Transmitter
1 x Receiver
1 x Installing Diagram

Product Features

  • 4.3 Inch TFT Car LCD Display Rearview DVD Mirror Monitor Parking Reverse System. 2.4GHz Wireless Camera with Transmitter & Receiver
  • Best for the safe use of Rear view, high-definition screen, make the image clearer, more vivid colors
  • Applicable to variety of vehicles: car, mini-truck, mini-van etc. Perfectly solve the issue of bad car rear view effect, can help reduce incidents and accidents
  • Note: this monitor is not bright like normal mirror due to it was added anti-glare technology on the screen
  • Support PAL / NTSC. The system automatically starts to search for the camera signal and switches from DVD/VCD video mode to backup camera video, when you reverse gear is on. Once the parking is finished, it will switch off automatically

Click Here For More Information

“As an Amazon Affiliate I earn from qualifying purchases made from links in this post”


  1. Christopher says:

    READ thie first…. Works we’ll and pretty easy to install. The only issue is you MUST have both wireless senders power on only while in reverse. The reason I say this is if you have them stay on they get very hot and the picture gets very blurry and poor. The rear sender is powered but the reverse light So it’s easy to hook up. But most people (myself included) will power the front in car unit by the “acc” or anytime the key is on… Again DON’T DO THAT, of you do the unit will be fine when you first…

  2. KP says:

    Works great! As others have said, the instructions are non-existent and some basic wiring skills are needed. (Install difficultly rating might be a 3 or 4 out of 10.)The mirror has two video inputs on it, so theoretically you could run a GPS or forward facing camera if you wanted. Not sure how the wiring would work for that if you are using the back up lights for a power source. I just left the extra one alone.My install was in an older F150 truck. The wireless receivers are not too…

Comments are closed.