RV & Truck Electronics best prices


IP68 waterproof for the camera and IR Night Vision

18 led lights for enhanced night capability

With the adapter, you can power the system from cigarette lighter easily

Back up camera is connected to monitor via direct 43ft+23ft 4-Pin cable(provided).the two 43ft and 23ft can be wiring and disconnected with a connector

If you need a SUCTION CUP MOUNT to windshield, or if you need a shorter or longer RCA cable,Please contact us to get it

2 year warranty guarantee and lifetime tech support

Monitor Specification
-Meets FCC/CE/RoHS/UL/IP6X standards
-Resolution: : 960 (H) * 576 (V) Pixels
-Signal format: PAL / NTSC. Compatible with all signal formats
-Rated Voltage: 9V – 35V,500mA-20A

Rear view Camera Specification
-Meets FCC/CE/RoHS/UL/IP6X standards
-Image sensor: HD 8080
-Resolution:800 TV line
-S/N Radio: better than 48db
-Video output: RCA connector, 1.0vp-p,750hm
-Power: 12V-24V DC ,500mA-20A
-Waterproof grade: IP68
-Effective Pixels:960X488pixels/NTSC

Package Includes
1 x 7 inch LCD Monitor
1 x Backup Camera
2 x Power Cable 8.2ft
2 x RCA Cable 43ft+23ft
1 x Cigarette Lighter Adapter
1 x User Manual

Product Features

  • VIEW INSTALLATION VIDEO: https://youtu.be/Hw5EFfheObY ,The system can be powered by directly wiring to 12V-24V source cigarette lighter/fuse box/power point/ignition switch for continuous use or wiring to reverse light for reversing use.
  • IP68 waterproof, camera in color with 135 degree wide view angle, IR Night Vision clearly at night. Back up camera is connected to monitor via direct 43ft+23ft 4-Pin cable.43ft and 23ft cable can be wiring and disconnected with a connector.
  • Monitor has capability to monitor two video inputs V1/V2. V2 video input with priority (reverse camera) for safety by connecting blue wire to power positive or switch between v1 and v2 by press the button.
  • 7 inch LCD monitor is directly attached to flat dashboard surface with provided adhesive foam and bracket, the bracket can be removed for alternative mounting options. if you want a suction cup mount to windshield, Please contact us get it.
  • The rear view camera compatible with vehicle under 66ft. Installation instructions are included in the package ,2 year quality warranty lifetime tech support is available via elinawei0621@outlook.com

Click Here For More Information

“As an Amazon Affiliate I earn from qualifying purchases made from links in this post”


  1. Anonymous says:

    Really nice setup for use when pulling a trailer.

  2. Anonymous says:

    No Blind Spot behind pull behind camper!! I have mounted this camera and it is fairly easy to mount however the bracket is limited as to how much of a angle you can set it and securely fasten it. It has slots for mounting screws to be placed in after you have set the angle of the camera. But when I turn it as far as I needed to the screws holes could not line up. I had to raise it up further than I would have liked to attach with final screws. As to its performance sitting still it has a good picture. I will post later after a trip to…

  3. Anonymous says:

Comments are closed.